Rule: API Gateway Stage Cache Encryption at Rest Should be Enabled
This rule specifies that API Gateway stage cache encryption at rest must be enabled for data security.
| Rule | API Gateway stage cache encryption at rest should be enabled |
| Framework | HIPAA |
| Severity | ✔ Medium |
Rule Description: API Gateway Stage Cache Encryption at Rest for HIPAA
This rule requires enabling encryption at rest for API Gateway stage cache to adhere to the HIPAA compliance standards. HIPAA (Health Insurance Portability and Accountability Act) is a regulatory framework that sets standards for protecting sensitive patient health information.
Troubleshooting Steps:
- 1.
Verify if the API Gateway stage cache encryption at rest is enabled for the HIPAA compliance.
- 2.
Check if the appropriate encryption mechanisms are in place for the stage cache to ensure data confidentiality.
- 3.
Ensure that the encryption keys used for cache encryption are managed securely and comply with HIPAA requirements.
Necessary Codes:
There are no specific codes required for this rule. However, modifying the configuration of API Gateway stage cache encryption can be done using AWS Command Line Interface (CLI) commands or the AWS Management Console.
Step-by-Step Guide for Remediation:
- 1.
Log in to the AWS Management Console.
- 2.
Navigate to the Amazon API Gateway service.
- 3.
Select the desired API Gateway instance that needs to be checked for HIPAA compliance.
- 4.
Click on the Stages tab to view the available stages.
- 5.
Identify the stage that needs to be checked for encryption at rest compliance.
- 6.
Click on the stage name to access the stage settings.
- 7.
In the stage settings, locate the cache settings section.
- 8.
Ensure that the "Encryption at Rest" option is enabled.
- 9.
If the "Encryption at Rest" option is not enabled, click on the Edit button.
- 10.
Enable the "Encryption at Rest" option.
- 11.
Optionally, choose the appropriate encryption key management settings (if applicable) based on your organization's security requirements and best practices.
- 12.
Save the changes and exit the stage settings.
- 13.
Repeat this process for each API Gateway stage that needs to comply with HIPAA regulations.
- 14.
Verify that the encryption at rest is successfully enabled for the API Gateway stage cache by rechecking the stage settings.
Conclusion:
By following the above steps, you can enable encryption at rest for the API Gateway stage cache to comply with the HIPAA requirements. Ensuring encryption at rest for sensitive patient information enhances the overall security and protection of the data, helping you meet your compliance obligations.